Welcome to your Post-Training Certification Assessment. For each question, check any/all that apply. Name Business Email Phone Number 1. The SaltFacial Skin Renewal System features 3 different technologies designed to be used as effective stand-alone therapies, as adjuncts to other treatments and procedures, or in combination as the SaltFacial Skin Renewal Therapy treatment. The 3 steps of the SaltFacial Skin Renewal Therapy treatment are performed in a specific order -- Choose the answer that describes the process in the correct order: Sea Salt Resurfacing, Aesthetic Ultrasound, LED Phototherapy Aesthetic Ultrasound, Sea Salt Resurfacing, LED Phototherapy Sea Salt Resurfacing, LED Phototherapy, Aesthetic Ultrasound Dermal Infusion, Sea Salt Resurfacing, LED Phototherapy 2. What features make the SaltFacial Sea Salt Resurfacing different from the rest of the exfoliation market? All-natural sea salt is used as the resurfacing medium Only positive pressure is used (no vacuum or suction) The handpiece is designed at the precise angle for efficient and uniform removal of tissue All of the above 3. Does the Sea Salt Resurfacing use any vacuum or suction during treatment? Yes No 4. What are some of the benefits of using sea salt? What are some of the benefits of using sea salt? Select any/all that apply. It's antibacterial and antimicrobial It draws moisture in and helps hydrate the skin It helps balance the pH of the skin It's all-natural, non-toxic, and bioinert All of the above 5. Which part of the Sea Salt Resurfacing treatment technique is most important? Pressing the handpiece down for 5 seconds before lifting Setting the intensity level to 10 Holding the skin TAUT at all times All of the above 6. What is the importance of using the 'heel toe' method of lifting the handpiece from the skin? Select any/all that apply. Helps drive topical products deeper into the tissue Prevents wasting salt during the treatment Helps reduce salt spray during treatment None of the above 7. Does pressing the handpiece firmly into the skin increase the intensity and/or effectiveness of the Sea Salt Exfoliation? Yes No 8. The SaltFacial Sea Salt Exfoliation is 100% customizable. From delivering a very light exfoliation with no downtime, to deeper resurfacing for scars, pigment, and stretch marks. From the list below, select the ways to adjust the intensity of the treatment provided. Select any/all that apply. Push the handpiece down harder into the treatment area Increase or decrease the Intensity Level setting on system Increase or decrease the 'time on tissue' - including the speed of each pass and the number of passes performed All of the above 9. Should patients discontinue and/or avoid the use of retinols for 5-7 days prior to the sea salt resurfacing treatment? Should a patient discontinue and/or avoid the use of retin-A, glycolic acid, and chemical peels for at least 5-7 days prior to a Sea Salt Exfoliation? Yes No 10. When should you remove and recharge the Rechargeable Dehumidifier? When the beads are GREEN When the beads are ORANGE It doesn't need to be replaced None of the above 11. How often should you change the HEPA waste filter? With each new canister of salt When it overflows Every Tuesday None of the above 12. When should you change the handpiece tubing? Daily Weekly Monthly With each new Salt Kit (or every 4 canisters of salt) 13. What does the Aesthetic Ultrasound do for the skin? Select any/all that apply. Provides images of muscle and bone Stimulates circulation in the superficial layers of the skin Temporarily increases the skin's permeability for greater depth of penetration and absorption of topicals None of the above 14. What is the mechanism of action for the Aesthetic Ultrasound? Related to the Aesthetic Ultrasound process and cavitation, which of these phrases apply? It uses heat to tighten the skin It uses stable cavitation to temporarily create space between cells for optimal product penetration It uses sound waves to create images of cartilage, ligaments, and bones None of the above 15. What are the only two controls that one uses on the Aesthetic Ultrasound device? Power Start/Stop Select Up/Down 16. What are the recommended settings (duty cycle, treatment time, power) for the Aesthetic Ultrasound? 100%, 10 minutes, 2.50 W/cm2 75%, 9 minutes, 2.00 W/cm2 50%, 8 minutes, 1.85 W/cm2 None of the above 17. Can the Aesthetic Ultrasound work with the blue cap left on? Yes No 18. Which of these factors impact the effectiveness of the Aesthetic Ultrasound treatment? Select any/all that apply. Which of these factors impact the effectiveness of the Aesthetic Ultrasound treatment? Select any/all that apply. Maintaining full contact with the treatment head Using enough Gliding Gel Using the appropriate treatment settings None of the above 19. Can topicals other than the SaltFacial Gliding Gel be used during the Aesthetic Ultrasound treatment? Can products other than the SaltFacial topical products be used with The SaltFacial Skin Renewal Therapy? Yes - many offices use the topical(s) that best meet the need of the patient and/or condition they are treating No - only the SaltFacial Gliding Gel can be used 20. What are the 4 treatment modes available for use on The SaltFacial LED Phototherapy Module? What are the 4 LED Phototherapy treatment modes available on The SaltFacial? Acne Light Therapy / Photodynamic Therapy / Anti-Aging Therapy / Healing Therapy Acne Light Therapy / Photodynamic Therapy / Collagen Restoration / Skin Rejuvenation Acne Light Therapy / Antibacterial Therapy / Collagen Restoration / Anti-Inflammatory None of the above 21. How does the Blue light on The SaltFacial LED Phototherapy module benefit the skin? Check any/all that apply. Why is the exact wavelength for Blue Light so important? Select any/all that apply. It makes the skin darker (similar to a tanning bed). It doesn't. Only the red light benefits the skin. It has been proven to effectively kill acne causing bacteria, MRSA, and Staph None of the above 22. How does the Red Light on the LED Phototherapy module benefit the skin? Select any/all that apply. Promotes healing by increasing cellular proliferation Reduces inflammation Reduces redness None of the above 23. Which one of the 4 LED Phototherapy treatment modes is contraindicated for use on patients with Rosacea? Which one of the 4 LED treatment modes has a contraindication for patients with active Rosacea? Acne Light Therapy Photodynamic Therapy Collagen Restoration Skin Rejuvenation 24. How far from the treatment area should the LED panels be positioned? The panels should be touching the treatment area The panels should be facing away from the treatment area All of the above None of the above 25. How long do you hold down the On/Pause button when starting LED Phototherapy treatment? You don’t hold it down, you just press and go As long as it takes for the lights to turn on About 2-3 seconds, until the white On/Pause light illuminates (on far-left side of LED Control Panel) None of the above 26. What type of eyewear is safe for the patient to use during LED Phototherapy with The SaltFacial? Soft gauze pads Tanning goggles Only the protective LED eyewear provided by The SaltFacial manufacturer (SaltMED) None of the above 27. How should the LED panels be positioned when not in use? What wavelength (nm) is the Blue Light on The SaltFacial? In the front of the system with the panels facing the SaltFacial logo In the back of the system with the panels facing the pressure gauge To the side of the system with the panels facing the floor None of the above 28. Daily maintenance for The SaltFacial system consists of what processes? Select any/all that apply. Daily maintenance for the SaltFacial Skin Renewal System consists of what processes? Select any/all that apply. No daily maintenance is required Cleaning all accessory items used (handpiece, ultrasound head, LED goggles) Checking the rechargeable dehumidifier Purging the System (after EVERY treatment) 29. Weekly maintenance for The SaltFacial system consists of what processes? Select any/all that apply. Weekly maintenance for the SaltFacial Skin Renewal System consists of what processes? Changing the salt canister Removing and recharging the Rechargeable Dehumidifier (if needed) Changing the HEPA waste filter Cleaning the No-Vac Eductor 30. Which steps are part of Purging the System? Power on the Sea Salt Resurfacing module Set intensity level to 10 Turn salt flow on Remove salt canister from cradle and hold it below the level of the tubes Hold thumb over handpiece opening until all salt clears from the soft tube connected to the metal barb in the middle of the powder cap Place salt canister back into cradle and close salt chamber door Time's up
